1. Home
  2. Trident Flat Fold P2 Level 3 Respirator

Features:

Multilayer Technology – Advanced multilayer technology providing protection against mechanically and thermally generated particulates including fluids, dusts, mists, fumes, and smoke.

  • 3 Panel – Three panel design provides structural integrity, form fit seal, and optimal comfort. All three mask panels and seams have been independently tested and certified to AS 4381:2015 Level 3 – ISO 22609
  • Bacterial Filtration Efficiency – Bacteria Filtration Efficiency (BFE) > 99%
  • Fluid Resistance – Fluid Protection level 3, 160mmHg
  • Proprietary Foam Nose Seal – Proprietary adjustable foam nose pad to ensure consistent optimum facial seal and reduce fogging of eyewear.
  • Adapts to Most Faces – Versatile unisex fit suitable for a range of facial shapes and sizes. Effective for many “hard to fit” individuals.
  • Fit Test Results – Specialized TRIDENT respirator seal attains unrivalled PortaCount fit testing results.
  • Low Breathing Resistance – Low breathing resistance, maximizing wearer comfort, durability, and life of product.
  • Use with Other PPE – Designed to be used in conjunction with other mandatory personal protective equipment.
  • Latex Free – Latex Free to avoid the risk of developing allergies with repeated exposure.
  • Batch Numbered and Individually Packed – Each mask is individually batch numbered and packaged for the ultimate traceability, portability, and hygiene.

Standards & Registrations:

Certified to:

  • AS/NZS 1716:2012
  • ID No. BMP 732382
  • AS 4381: 2015 Level 3, 160 mmHg
  • ID No. BMP 737354

ARTG 344154

Packaging:

Packaging

1 Unit Per Pack

 

20 Packs Per Box

 

24 Boxes Per Carton

Sizing:

Extra Small

RTCFFP2XS

Small

RTCFFP2S

Regular

RTCFFP2

Regular Extended Length Head Straps

RTCFFP2E

XX Large

RTCFFP2XXL

How to Apply:

  • Position the respirator in the palm of your hand with the nose strip at your fingertips, ensuring both head straps are untwisted over the back of your hand.
  • Open both the top and bottom panels of the mask and make a bend in the foam nose seal. Place the lower panel under the chin and the upper panel with the foam nose seal over the nose bridge and underneath the eyes.
  • Holding the respirator with one hand, position the top untwisted head strap to the crown of the head.
  • Draw the lower untwisted head strap up and over the face to below the ears and back of the neck. DO Not Criss Cross Head straps.
  • With both hands, mold the foam nose seal at the top of the mask to the nose bridge and cheeks ensuring a secure fit and seal.
  • Perform a fit check (see fit check below). Cover the front of the respirator with both hands. Inhale and exhale sharply.

Fit Check List:

  • If air leaks at the nose or cheek areas adjust the foam nose seal until a seal is achieved.
  • If air leaks around the edge of the respirator adjust the head straps and reposition the mask until a seal is achieved.
  • A successful fit check is when there is no air leakage.
  • Always fit check before entering the work area.
  • If a successful fit check cannot be achieved, remove, and refit the respirator.
  • If you still cannot obtain a successful fit check, do not enter the work area.

How to Remove:

  • The respirator may be contaminated. Touch only the head straps when removing.
  • Pull the bottom strap over the top of the head.
  • Pull the top strap over the top of the head.
  • Pull the top strap over the top of the head.
  • Dispose of respirator into the appropriate waste receptacle in accordance with site infection control and prevention policies.
  • Wash and sanitize your hands thoroughly.

Important:

  • A fit check must be performed prior to using your disposable respirator.
  • Always read the disposable respirator wearer instructions.
  • Should air leakage occur around the nose, adjust the foam nose/cheek support strip to eradicate the leakage & perform the above fit check.
  • Should air leakage occur around the nose, adjust the foam nose/check support strip to eradicate the leakage & perform the above fit check.
  • When an appropriate fit & seal cannot be achieved do not enter the hazardous environment & follow on-site policy referencing AS/NZS 1716:2012.

Note:

To achieve an optimum facial seal, the wearer should be clean-shaven. It is recommended the wearer be fit tested prior to use in accordance with AS/NZS 1715:2009 and/or onsite requirements. Training on the safe use and limitations of the disposable face mask must be performed in accordance with AS/NZS 1715:2009 section 2.4.

More Questions:

Still unsure if this product is right for your intended use? Get in contact with one of our Sales Representatives via the contact us page. 

Payment & Security

Zip it from just$10/week with

Your payment information is processed securely. We do not store credit card details nor have access to your drecit card information

How Can We Help?

Live Chat

Call Us

Email Us